Model |
HD coaxial tester HD-2800 series 【*】models are Optional |
Video Test |
|
Signal mode |
NTSC/PAL (Auto adapt) |
Display |
3.5 inch digital TFT-LCD ,480(RGB)x 320 resolution |
LCD adjustment |
Brightness, Contrast, Saturation adjustable |
1 channel BNC Input & 1 channel Output |
|
Video Output Mode |
1.0 Vp-p |
Video Level test |
|
Level test |
Video signals measured in IRE or mV (not for TVI,CVI ,AHD) |
Video level meter (Optional) |
|
Video Level meter |
PEAK video signal level, SYNC signal level, COLOR BURST chroma level measurement |
PTZ controller |
|
Communication |
Support RS485 |
Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc. |
|
Baud Rate |
600,1200,2400,4800,9600,19200,57600,115200bps |
Video signal generation |
|
Color bar generator |
Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color ) |
UTP cable tester |
|
UTP cable test |
Test UTP cable connection status and display in the screen. Read the number of the test box. |
DC12V 1A power output |
|
DC12V power output |
|
Audio input test |
|
Audio input test |
|
RS485 data analysis |
|
Data Monitor |
Captures and analyzes the command data from controlling device |
SDI test(Optional)* |
|
SDI video signal test |
1 channel SDI in(BNC interface)support 720p 25/30/50/60fps,1080p 50/60fps, 1080i 50/60fps PTZ control |
CVI test(Optional)* |
|
CVI video signal test |
1 channel CVI in(BNC interface)support 720p 25/30/50/60fps,1080p 25/30fps,camera OSD menu control over coaxial cable |
TVI test(Optional)* |
|
TVI video signal test |
1 channel TVI in(BNC interface) support 720p 25/30/50/60fps,1080p 25/30fps,camera OSD menu control over coaxial cable |
AHD test(Optional)* |
|
AHD video signal test |
1 channel AHD in (BNC interface)support AHD 2.0 version, 720p 25/30fps,1080p 25/30fps,camera OSD menu control over coaxial cable |
Cable scan (Optional) * |
|
Cable scan |
Search the cable by the audio signal |
Digital Multimeter (Optional) * |
|
AC/DC Voltage |
0-660V auto/manual range, the min resolution is 0.1mV |
AC/DC current |
660.0uA , 6.600mA, 66.00mA , 660.0mA, 10.00A |
Resistance |
660.0Ω, 6.600kΩ, 66.00kΩ, 660.0kΩ, 6.600MΩ, 66.00MΩ |
Capacitance |
6.6nf~66000uF, the min resolution is 1pf |
Diode |
0~2V forward voltage, the min resolution is 1mV |
Data hold |
|
Relative measurement |
Display the relative power value |
Continuity testing |
Built-in buzzer will sound, if resistance is lower than 50 Ω |
Testing speed |
3 times/ seconds |
Data range |
-6600~+6600 |
Optical power meter (Optional) * |
|
Calibrated Wavelength(nm) |
850/1300/1310/1490/1550/1625nm |
Power range(dBm) |
-70~+10dBm |
Sensitivity(nW) |
0.001nW |
Connector type |
FC/PC |
Data hold |
Hold and display the measured value |
Relative measurement |
|
Visual fault locator (Optional) * |
|
Visual fault locator |
Test fiber’s bending and breakage ( SM and MM fiber) |
TDR Tester (Optional) * |
|
TDR Tester |
breakpoint and short circuit measurement(BNC cable, telephone cable) |
POWER |
|
DC 5V(2A) |
|
Low Consumption |
Energy saving technology, the battery icon real-time display |
English/Chinese and other languages OSD menu |
|
Keytone |
On/Off |
-10℃ ~+50℃ |
|
30%~ 90% |
|
Dimension/Weight |
194mm x 112mm x 48mm / 540g |